Spotting Guide

Step 1. Use a spoon or a dull knife to remove all solid materials.

Step 2. Blot up liquids with a clean, white, dry towel. Never rub, scrub or brush the carpet as this can cause excessive wear and permanently damage the carpets fibres.

Step 3. Work from the outside with large spills.

Step 4. Apply all cleaning agents to a white towel, never apply directly to the carpet, as this can damage the backing if too much is used.

Step 5. Rinse the last cleaning solution you’ve used by spraying with clear water and blotting one area with a clean, dry, white towel. You may use a wet/dry vacuum to extract out excessive moisture prior to the towel if you have one but this is not necessary.

Step 6. Once you have removed all visible stain, place a dry towel over the area. Then place a heavy colour fast object, such as a waste basket with a weight inside, on the towel. Leave overnight. Continue this procedure by replacing the wet towel with dry ones until nearly dry. Remove the weight and towel, then gently brush the carpet fibres with your hand to lift the tufts. Allow the area to completely dry before walking on it.

Please note: Please take care when carrying out this guide. If you are unsure about the spotting process please do not hesitate to contact us. 07963 134139

www.accleaningservices.co.uk
Carpet cleaning